SimplyPure Whole House Water Filter System

SimplyPure Whole House Water Filter System by InnerLight

SimplyPure™ Water Filter Replacement

After about 35,000 gallons of water have been processed, the internal pre and post filters should be replaced. This will insure that the system continues to operate at it’s highest effective removal capacity at all times. Depending on family size and water conditions, this is the equivalent to about one year’s normal usage. If the pressure drop from the filtration system, as measured by the two gages, occurs sooner and has a differential of more than 10 PSI, it is time to replace the sediment pre-filter. This would be an indication of high turbidity in the source water.

Use only new filters supplied by InnerLight. You can order the filters here.

The O-rings on the filter housing should be replaced at the same time as new filters are installed to prevent leakage, but have an expected life of two years.

CHANGING FILTERS

If you have a bypass installed on your system, you must close the valve prior to the system. Open a faucet in your home to relieve any pressure. Then, close the valve after the system and open the bypass valve to continue the flow of water to your home.

If you do not have a bypass, you must first turn off the water main to the home. Then, open a faucet within your home to relieve any pressure.

You may now use the supplied plastic filter housing wrench to open the filter housings and remove the filter cartridges and replace with new filters. Be careful to seat them vertically centered and replace the filter housing. Always use the filter housing wrench to avoid damaging the filter housing. Be certain to snug tightly, but not so tight as to damage the O-rings, the housing, or the threading.

SimplePure Filter Replacement

More Information about the SimplyPure™ Water System:

• Advanced KDF & GAC

Filter Technology

• Comparison to other Filters

• SimplyPure FAQs

• Warranty Information

• Installation Guide

• Filter Replacement

• Contact

Benefits of SimplyPure™ Whole House Filter:
• Improved Health
• Better Taste
• Pure water for pennies a gallon cost
• Skin and hair look younger
• Plumbing lasts longer
• No water waste like Reverse Osmosis
Systems
• Improve life of water heater and other water
based appliances
• Remove existing scaling
• Extend the life of laundered clothing
• Plants and pets thrive on chemical free water

SimplyPure™ Whole House Filter Removes:
• Bad taste and odors
• Inorganic Chemicals (chlorine, dichloro acedic acid, MX, etc.)
• Volatile Organic Compounds (benzene, trichloroethylene, etc)
• Microbiological Organisms (cryptosporidium, guardia, etc.)
• Trihalomethanes (bromoform, chloroform, etc.)
• Radiologicals (radon, etc.)
• Metals (lead, mercury, etc.)
• Pesticides (malathion, etc.)
• Fluoride, Nitrates & Nitrites
• Sediment & Turbidity
• Industrial Chemicals (PCB´s etc.)
• Plus many more contaminants

Specifications:
• FDA, NSF and WQA approved materials
• NSF Certified Independent Laboratory Testing
• US patented technology
• 3-stage filtration system
• 5 micron sediment pre-filter
• 5 micron patented KDF and GAC post-filter
• Dimensions: 30” x 14” x 10”
• Weight: 35 lbs.

• 35,000 gallon capacity (good for one year of average use with
family of five)
• 1” input/output
• 6 - 20 gpm flow rate (based on home water pressure)
• One year warranty for every single part of the system
• Manufactured in the U.S.A.
• Easily accommodates small or large facilities
• Easy installation
• Manufactured to last approx. 20 years

SimplyPure™ Whole House Water Filter System

Preferred Customer Price: $1,320.00

(to receive the 15% discount, please click Preferred Customer Savings)